If you have been setting traps for more than two weeks with no reduction in catch rates, the entry points are still open. Show Me Pest Control's Shiner exclusion assessment locates every access point and seals it with material mice and rats cannot chew through.
Why Trapping Alone Fails
Trapping is the final step, not the first one. These four elements are what a complete rodent solution in Shiner looks like from assessment to clearance.
Most rodent entry assessments find the obvious gaps. Ours finds all of them - gaps behind the dishwasher water line, weep holes in the brick, the gap above the garage door track, the vent screen that rodents have pushed through. Documented in writing, every one.
Steel mesh and copper wool are the industry standard for sealing gaps in rodent exclusion work because mice and rats will not chew through them the way they chew through foam and rubber. We use these materials, not the products that look like they work but last one winter.
Evidence mapping before trap placement is what converts trapping from a guessing game into a predictable clearance process. Runway smear marks identify the active travel corridors. Droppings distribution maps the harborage zone. Station placement follows the evidence - not a default pattern.
The follow-up is built into the process, not an add-on service. We return to verify exclusion integrity and review station data - the two data points that confirm the job is complete. Clearance is not declared until both confirm it.
The Population Math
Rat reproduction follows a similar pattern but at a different scale. Norway rats produce 4 to 6 litters per year with 8 to 12 pups per litter. Roof rats - more common in warmer parts of TX - produce 5 to 8 litters per year. Both species require larger entry gaps than mice (rats need approximately 1/2 inch vs. the 1/4 inch that mice can pass through), but both enter through the same categories of structural vulnerability: plumbing penetrations, damaged vent screens, gaps at the roofline and fascia, and foundation cracks. The entry point categories are the same; the sealing materials and methods scale to the size of the animal and the structural gap.
The most common trap placement mistake is working from a default pattern rather than evidence. Placing snap traps along every wall in a kitchen produces far lower catch rates than placing them on the specific runways identified by smear marks, at the specific corners where dropping density indicates concentration, and near the specific harborage locations identified by nesting material or insulation disturbance. Evidence-based placement converts trapping from a shotgun approach into a targeted clearance process. This is why the assessment precedes any station placement - the evidence determines the strategy, not a standard protocol that ignores what the property shows.
Rodent activity that never seems to slow down in Shiner?
Call +1-866-315-0243. Our exclusion protocol addresses the input, not just the output - that is how the problem ends.
Most people who have a rodent problem in their Shiner home have looked for entry points themselves. They found a couple, sealed them with foam from the hardware store, and found that the problem continued. The entry points they found were visible from eye level. What they did not find were the penetrations in the cabinet floor under the kitchen sink, the gap in the basement rim joist, the dryer vent with the missing backflow damper, the space behind the dishwasher water line, and the weep holes in the brick exterior. Our assessment covers all of these locations - not because they are obscure, but because they require getting into the right spaces to see them. A written map of every opening on the property, with the sealing material matched to each one, is the output of that assessment. Most Shiner clients have that map and say the same thing: they had no idea how many openings their home had.
Attic rodent infestations present a specific set of considerations that differentiate them from standard interior treatment. Contaminated attic insulation - insulation saturated with rodent urine and droppings over a sustained infestation period - is a health and structural concern that requires remediation beyond the rodent control treatment itself. Roof rats are the primary species in attic infestations in warmer parts of TX; Norway rats in the basement or crawl space is the more common pattern in northern areas. The entry point categories for attic infestations focus on the roofline: fascia gaps, broken or missing roof vent screens, soffit-fascia separations, and construction gaps at chimney flashing. Commercial rodent programs add a documentation layer not required in residential treatment: service logs, catch records, station maps, and trend reports are standard requirements for food service establishments operating under health department oversight in Shiner and TX. Show Me Pest Control provides full program documentation for commercial accounts as a standard component of every service agreement.
Services Provided
Comprehensive entry assessment produces a written map of every structural opening - the document that makes the exclusion work verifiable and the follow-up inspection efficient.
Call to Schedule
Every entry point identified in the assessment is sealed with the appropriate rodent-resistant material - steel mesh, copper wool, or commercial exclusion sealant, matched to the gap type and exposure. The work that converts trapping from maintenance into clearance.
Call to Schedule
Bait stations placed based on evidence mapping - active runways, droppings distribution, and harborage zone location - not arbitrary placement. With exclusion complete, the population clears predictably.
Call to Schedule
Attic and crawl space rodent treatment includes roofline entry assessment, station placement in inaccessible areas, and insulation contamination evaluation for properties with sustained infestation history.
Call to Schedule
Commercial rodent programs in Shiner with full documentation packages: station maps, service logs, catch records, and trend analysis formatted for health department compliance.
Call to Schedule
The follow-up visit is when the work is confirmed. Exclusion points re-inspected, station data reviewed, and clearance documented when both confirm zero active population.
Call to ScheduleThe Process
Phone assessment determines species, activity pattern, duration, and whether adjacent structure areas need to be included in the assessment scope.
Every gap, penetration, and structural opening documented. The written map is the foundation for the exclusion work and the follow-up verification.
Exclusion is completed before trapping begins. With entries sealed, station placement follows the evidence map for maximum efficiency.
Follow-up verifies exclusion integrity and confirms population trend to zero. Clearance is documented when both data points confirm it.
Client Results in Shiner
Four months, two mice a week, zero improvement. The assessment identified 9 entry points - the two behind the refrigerator water line alone were eye-opening. Exclusion sealed all 9. Not a single catch in three weeks after that. The problem was the open entries, not the traps.
11 entry points along the old sill plate gap - that was the answer. The previous contractor said the house just had mice. Show Me Pest Control found 11 openings that a proper entry assessment was designed to find. Sealed them all. No rodent activity the following winter. The house does not just have mice. It had gaps.
We had a national pest control company for 18 months. Monthly visits, monthly cost, monthly activity in the reports. Switched to Show Me Pest Control. Their entry assessment found the gap behind the dishwasher drain that the previous company had documented in their own reports but never sealed. Exclusion work completed in one visit. Zero activity in the follow-up period. I could not believe the problem had a simple answer that just was not being acted on.
Common Questions
The most common reason rodents return after sealing in Shiner is that the entries you found were not all the entries. Gaps under the kitchen sink at the plumbing penetrations, weep holes in brick, dryer vents with missing dampers, and sill plate gaps in older construction are rarely found by self-inspection. Our assessment methodology is designed to reach these specific locations - because that is where the entries are. We also use rodent-resistant materials rather than consumer foam, which rodents chew through in one season.
We use steel mesh, copper wool, and commercial-grade rodent exclusion sealants - materials that rodents cannot chew through, as opposed to expanding foam alone, which mice and rats readily gnaw through within one season. The material used at each entry point is matched to the gap size, the location, and the exposure: steel mesh for larger structural openings and plumbing penetrations, copper wool packed into small gaps and crevices, and commercial exclusion caulk to seal and finish. The written entry map we produce documents the material used at every location so the follow-up inspection can verify that each seal remains intact.
We use tamper-resistant bait stations that require a specific mechanical action to open - designed so that children and pets cannot access the bait material. Stations are placed in locations not accessible to children or pets where possible: under appliances, inside cabinet bases, along wall runs behind furniture. For homes with specific concerns about bait safety, snap trap-only protocols are also available. We discuss placement locations and safety considerations with every client before treatment and adjust the approach based on your household situation - call +1-866-315-0243 to discuss your specific setup in Shiner.
Most residential rodent cases in Shiner follow a 2-visit structure: exclusion and station placement, then follow-up 2-3 weeks later to verify and confirm clearance. With exclusion complete, the interior population clears predictably. Commercial properties run on monthly service schedules with documentation. We give you a timeline estimate based on your specific property during the initial phone conversation.
Yes. Attic and crawl space rodent treatment in Shiner includes a roofline entry assessment for attic infestations - examining fascia gaps, roof vent screens, soffit separations, and chimney flashing gaps - and a crawl space perimeter assessment for foundation-level entries. Station and snap trap placement in confined access spaces requires a different approach than open interior placement, and our technicians are equipped and trained for both. For attic infestations with a long history, we also evaluate the insulation for contamination and advise on remediation if warranted. Call +1-866-315-0243 to discuss the specifics of your attic or crawl space situation in Shiner.
The exclusion-first principle is the same for both, but the specifics differ. Mice can enter through a 1/4-inch gap; rats require a 1/2-inch opening. Entry point categories differ accordingly - the gaps that require steel mesh for rats are often sealed with copper wool for mice. Rat runway evidence (smear marks, droppings size, gnaw marks) differs visually from mouse evidence, affecting station placement. Norway rats concentrate in basements and crawl spaces; roof rats concentrate in attics. Bait formulations and trap types differ between species. We identify the species during the assessment and adjust the exclusion material selection, station placement strategy, and trap type to match the specific animal. A protocol designed for mice applied to a Norway rat infestation will produce incomplete results for the same reason that misidentified species in cockroach treatment produces incomplete results - wrong protocol for the specific pest.
If you have been catching mice every week with no improvement, the entry points are still open. Call +1-866-315-0243 to schedule an entry point assessment in Shiner - the step that ends the treadmill.
Call +1-866-315-0243 Now